Industrial Pumps

Sharma Technocast manufactures industrial pumps for chemical, petrochemical, pharmaceutical, sugar, paper, and effluent treatment plants. Every pump is built around a specific duty, whether that's moving corrosive acid, thick sludge, hot thermic fluid, or clean high-pressure water. Hydraulic design conforms to ISO 2858 with DIN 2543 flanges, and pumps are offered in cast iron, cast steel, SS 304/316, Alloy-20, CD4MCU, and Hastelloy B & C depending on the fluid.

  • Shop Primary Image

    Multi-purpose rotary gear pump with double-helical gears for viscous liquids. Self-priming, constant flow for oils, molasses, and greases.

  • Shop Primary Image

    Non-clog self priming mud/sewage pump, mechanical seal type. Primes itself and passes solids to 25 mm, for mud, sewage, and dewatering duty.

  • Shop Primary Image

    End-suction horizontal centrifugal pump with semi-open impeller. Handles liquids carrying solids in suspension, for ETP/STP and chemical duty.

  • Shop Primary Image

    Horizontal single-stage side suction pump for filter press and effluent duty. Higher-pressure transfer up to 10 kg/cm². For positive suction head only.

  • Shop Primary Image

    Submersible sewage and effluent pump that runs fully submerged in the sump. Up to 500 m³/hr, with twin mechanical seal and wear-resistant wet-end options.

  • Shop Primary Image

    Vertical seal-less / gland-less polypropylene pump that can run dry. No mechanical seals or glands, the first choice for effluent and corrosive transfer.

  • Shop Primary Image

    Vertical long-shaft sump pump for tanks, pits, and sumps below floor level. Dry motor above, submerged wet end; immersion length up to 4 m.

  • Shop Primary Image

    Water separator pump for paper-mill and process vacuum water recovery. Built to pump from a vacuum separator vessel, up to 200 m³/hr.

View Next Page >>