Self Priming Pumps

Sharma Technocast manufactures industrial self priming pumps for the jobs where the pump has to sit above the liquid, dewatering pits, pumping sewage, moving mud and effluent. These are non-clog pumps that clear their own air and pull the liquid up without a foot valve or manual priming every time. Built in cast iron, cast steel, SS 304/316, and higher alloys, with solids handling up to 25 mm, they're made for dirty water that would jam an ordinary pump.

non-clog pumps that prime themselves for mud, sewage, and dewatering where the pump sits above the liquid.

What Are Self Priming Pumps

A normal centrifugal pump can't start dry. If there's air in the suction line it just spins and moves nothing, which is a problem whenever the pump sits above the liquid it's pumping. A self priming pump solves this: it holds a reservoir of liquid inside the casing, mixes incoming air with that liquid, expels the air, and creates the vacuum needed to draw liquid up the suction line, all on its own.

They're also built non-clog. The impeller and passages are designed to pass solids and stringy material up to 25 mm without jamming, which is exactly what you need for sewage, mud, and effluent. So they combine two features in one pump: it primes itself, and it doesn't choke on dirty liquid.

Working Principle

On start-up, the pump casing holds a charge of liquid. As the impeller spins, it mixes the air from the suction line with this liquid and throws the mixture outward. The air separates out and escapes through the discharge, while the liquid falls back into the casing to repeat the cycle. Within a short time the suction line is evacuated, a vacuum forms, and atmospheric pressure pushes liquid up into the pump.

Because the casing retains liquid after shut-down, the pump re-primes automatically the next time it starts — no foot valve, no manual filling. The non-clog impeller and generous passages let solids pass straight through rather than building up and blocking the pump.

Advantages

Primes itself

No foot valve, no manual priming before each start.

Handles solids

Non-clog design passes mud, sewage, and stringy material up to 25 mm.

Sits above the liquid

Ideal where the pump can't be submerged or placed at liquid level.

Re-primes automatically

Retained liquid means reliable restart after shut-down.

Easy access

Mounted dry and above ground, so inspection and service are simple.

Applications

Self priming pumps handle dewatering of foundations, trenches, pits, and pot-holes on construction sites, and sewage and effluent pumping for ETP and STP plants. They move mud, marine bilge, oils, and spirits, empty swimming pools, and pump liquid cargo from freighters and barges. Municipalities and public health departments use them for sewage and drainage; chemical, pharma, food, paper, sugar, and steel plants use them for effluent and waste-water transfer and filter press feeding.

Industries

Municipal and public health
Construction and civil engineering
Chemical and pharmaceutical
Food
Paper and sugar
Steel
Marine and ports
Effluent treatment

Materials of Construction

Cast iron and cast steel for general sewage and dewatering; SS 304/304L and SS 316/316L for corrosive effluent; bronze, Alloy-20, CD4MCU, and Hastelloy B & C for aggressive or abrasive liquids. Mechanical seal options (carbon vs ceramic/TC with NBR, Viton, or PTFE elastomers) are matched to the fluid.

Why Choose Sharma Technocast for Self Priming Pumps

Non-clog passages cast right

The casing and non-clog impeller are cast on our own casting line and machined in-house (Precision Machining), so the passages pass solids without the rough spots where debris catches.

Shafts forged for abrasive duty

Shafts are forged at our forging facility for grain strength, then machined true, so they hold up under the load and abrasion of dirty-water service.

Seal matched to the fluid

Mechanical seal face and elastomer combinations (NBR, Viton, PTFE) are selected for the actual liquid, since the seal fails first on sewage duty.

Gland or mechanical seal build

Available in both bare-shaft gland-packing and mechanical seal versions, so you match the seal type to how dirty the liquid is.

Built to be serviced

Mounted dry and above the liquid, so clearing a blockage or changing a seal doesn't mean draining a sump.

Self Priming Pump Range

The series below are shown as products under this category.

Not sure which pump fits your duty?

Send us the fluid, flow, head, and temperature, and our engineers will match a series or trim a pump to your exact operating point.

View Next Page >>