- C1/503-504 Celebration City Center, Gala gymkhana road, South Bopal Ahmedabad, Gujarat, INDIA
Goat Heads
Component that allows multiple flow lines to be compiled into one bore generally used on frac tree and manifolds during fracturing.
Goat head frac adaptor is the equipment often used on frac tree and frac stack during fracturing work, which is often in studded and flange-end connections, which is often in studded and flange-end connections.
Features:
- Available in sizes from 4 1/16″ thru 7 1/16″. Working pressures of 10,000 and 15,000.
- Facet configuration of 4 or 6 outlets.
Related Products
-
Crossover connection flange that allows hammer connection equipment to be mated to a flange.Weco Flanges are the most complete line of standard and sour-gas service pipe connectors in the world. Available in 1 to 12-inch nominal pipe sizes with cold working pressures up to 20,000 psi, Weco Flanges are manufactured using the finest raw materials, tooling procedures, and heat-treating techniques available. Materials meet ASME and AISI standards. Each Flanges is carefully inspected to ensure long, dependable service in the most extreme conditions. Like all pressure containing products. -
Pressure-containing equipment consisting of flanged or studded connections used to control and direct fluid flow. Crosses and tees are typically a component of frac trees, manifolds, and Christmas/production trees. Can be used in Frac Tree and flowback applications.Flange crosses and tees according to the design requirements and face-to-centerline requirements of API Spec 6A. When specific nominal sizes and combinations of nominal sizes do not appear in API Spec 6A, Studded crosses and tees, flanged crosses and tees are widely used for choke manifolds, kill manifolds, mud manifolds, and Christmas trees. *Various sizes and pressure ratings, custom manufacturing available. -
Blind Flanges are a solid flange with relevant bolt holes used to blank off an opening. Test Flanges are a solid flange with relevant bolt holes with a port to monitor pressure, used to blank off an opening.Blind flanges are used to seal the end of high pressure openings. They are commonly used for capping the flow of gas or liquid through a combination of oil and gas products. Blind flanges also allow for easy access to the equipment in case work must be done inside the flow. They are oftentimes used for high pressure applications. Test flanges are commonly known for their 9/16th UNF and ½ inch NPT. While a Blind Flange will commonly not have any holes. *Offered in multiple sizes and pressures -
Component with studded connections on each end, used to connect flanges with different nominal sizes, pressure ratings and configurations.A Double Studded Adapter (DSA) is commonly used to connect flanges with different nominal sizes, pressure ratings, and configurations. *Various sizes and pressure ratings, custom manufacturing available.