METAL CASTING
molten metal casting process by Sharma Technocast industrial foundry and casting manufacturer India
precision casting part and machined shaft by Sharma Technocast industrial metal components manufacturer India

Metal Casting Company in India: Sand, Investment, Centrifugal & Die Castings

Sharma Technocast is an ISO 9001:2015 certified metal casting manufacturer in Ahmedabad, India. We produce sand, investment, centrifugal and die castings in cast iron, ductile iron, carbon and stainless steel, aluminium, zinc and bronze, then machine, heat-treat and inspect them in-house. We supply prototype to bulk orders for oil & gas, valve, pump, aerospace and heavy-engineering OEMs worldwide.
Our Foundry Capabilities

Casting Capabilities at a Glance

Eight casting routes under one roof, from 10 g die castings to 800 kg centrifugal castings, all machined, heat-treated and inspected in-house.

Process Max size Part weight Tolerance / wall Best for
Sand casting (flask) 650 × 550 × 200 mm 1.5 – 25 kg Machined to drawing Housings, brackets, pump parts
Sand casting (flaskless) 750 × 650 × 250 mm 10 – 60 kg Machined to drawing Medium-volume industrial parts
Sand casting (no-bake) 1000 × 1100 × 350 mm 10 – 200 kg Machined to drawing Large, complex heavy parts
Investment casting As per drawing 0.3 – 99 kg ±0.1 mm, min. wall 3 mm Valves, aerospace, precision parts
Centrifugal casting (horizontal) OD 550 mm, ID 75 mm 50 – 800 kg Machined to drawing Sleeves, bushes, liners, rings
Pressure die casting (aluminium) 400 × 400 × 150 mm 10 g – 5 kg Thin walls, high repeatability Housings, covers, brackets, heat sinks
Zinc die casting (hot chamber) On request On request Very thin walls, fine detail Fittings, hardware, connectors
Gravity die casting (aluminium) As per drawing Up to 15 kg Dense, good surface finish Heavier housings, pump & valve bodies

Need a size or alloy outside these ranges? Send your drawing and we will confirm feasibility within 24–48 hours.

Send Your RFQ

Integrated Metal Casting Manufacturing Facility

We operate a fully Integrated Metal Casting Manufacturing Facility in India equipped to handle casting and machining of graded cast iron, aluminum, brass, bronze, and stainless steel materials.

Metal Casting Manufacturing Process:

This integrated workflow ensures faster turnaround, higher quality control, and optimized cost efficiency, making Sharma Technocast one of the most reliable metal casting companies in India.

 
Aluminium pressure die cast foundry facility

Complete Metal Casting Solutions From Design to Delivery

From a rough concept sketch to a detailed 3D CAD model, we manage your project from design to delivery. With lead times between 4 to 17 weeks, our engineering team offers:

Design consultation and prototyping

Casting simulation and material selection

Production planning and delivery management

precision casting parts and machined industrial components by Sharma Technocast manufacturer India

Our commitment is simple — precision, reliability, and performance at every stage

If you are still working out which route suits your component, our guide to how the metal casting process works sets out each method and where it fits.

Integrated Casting Lines for Sand Casting, Investment Casting, and Centrifugal Casting

Advanced Infrastructure

With an annual production capacity of 72,000 metric tons, we are equipped to manufacture high-performance, application-specific castings for a wide range of industrial uses.

Sand Casting

Our sand casting facility is engineered to deliver robust, cost-effective castings for medium to large components with complex geometries. With flexible moulding methods and high pouring capacity, we support heavy engineering, oil & gas, automotive, and infrastructure applications.
From prototype development to bulk production, our sand casting process ensures dimensional accuracy, structural integrity, and consistent quality.

We have covered the sand casting process in detail separately, including mould preparation and the point where the method reaches its size and finish limits.

Horizontal Parting Line with Flask

Maximum Part Size

L650 mm / 26 in
B550 mm / 22 in
W200 mm / 8 in
Part Weight
Min1.5 kg / 3 lbs
Max25 kg / 55 lbs

Horizontal Parting Line Flaskless

Maximum Part Size

L750 mm / 30 in
B650 mm / 26 in
W250 mm / 10 in
Part Weight
Min10 kg / 22 lbs
Max60 kg / 132 lbs

No Bake

Maximum Part Size

L1000 mm / 39 in
B1100 mm / 43 in
W350 mm / 14 in
Part Weight
Min10 kg / 22 lbs
Max200 kg / 441 lbs

Investment Casting

Our investment casting process is ideal for high-precision, near-net-shape components requiring excellent surface finish and tight tolerances. This method significantly reduces machining requirements and is widely used for aerospace, defense, valve, pump, and precision engineering parts.
We support complex profiles, thin walls, and intricate internal features with repeatable accuracy.

Our guide walks through the investment casting process step by step, covering how the wax pattern is built and how the ceramic shell forms around it.

HORIZONTAL

Typical Part Weight Range 0.3 kg – 99 kg
Part thickness 3 mm / 0.11 in
Accuracy 0.1 mm

Stainless Steel: Grades like 304, 316, and 17-4PH offer excellent corrosion resistance and strength for medical, food, and marine parts. Aluminum Alloys: Lightweight, corrosion-resistant, used in aerospace and electronics, often with copper, magnesium, or silicon additions. Carbon & Alloy Steels: Provide structural integrity, used in motors, valves, and firearms. Copper Alloys: Includes brass and bronze for electrical and general industrial uses. Nickel & Cobalt Alloys: High-performance superalloys for extreme temperature and creep resistance (e.g., turbine components). Titanium Alloys: Valued for high strength-to-weight ratio in aerospace.

Centrifugal Casting

Centrifugal casting spins the mould at high speed while molten metal is poured, forcing the metal outward against the mould wall. The result is a dense, fine-grained wall with very low porosity, ideal for round parts such as sleeves, bushes, liners, rings and pipe sections. We cast horizontally for long cylindrical parts (up to 550 mm OD and 800 kg) and vertically for short rings and flanges (up to 600 mm OD), then machine them to final size in-house.

Horizontal Centrifugal Casting

Outside diameter Up to 550 mm / 22 in
Inside diameter From 75 mm / 3 in
Min. part weight 50 kg / 110 lb
Max. part weight 800 kg / 1,764 lb

Vertical Centrifugal Casting

For rings and flanges up to 600 mm OD. Sizes on request.

Die Casting

Die casting forces molten aluminium or zinc into a hardened steel die, producing parts with excellent dimensional repeatability, thin walls and a smooth as-cast finish. Because the die is reused thousands of times, it is the most economical process for medium to high volumes. We run cold-chamber pressure die casting machines from 120 to 350 tonnes for aluminium, a hot-chamber machine for zinc, and gravity die casting for heavier parts, all backed by in-house CNC machining, finishing, and inspection.

Aluminium and zinc die castings from 10 g to 15 kg, machined, finished, and inspected in-house for medium to high volumes.

Aluminium Pressure Die Casting

Zinc Die Casting

Gravity Die Casting

Process High-pressure injection into a steel die for thin-walled, complex aluminium parts. Hot-chamber casting of Zamak for small, highly detailed parts ready for plating. Aluminium poured into a permanent steel mould for denser, heavier parts.
Machines 350 T ×1, 180 T ×2, 120 T ×2 (cold chamber) Hot chamber Permanent steel moulds
Part weight 10 g – 5 kg On request Up to 15 kg
Max part size 400 × 400 × 150 mm On request As per drawing
Alloys ADC12, A380 Zamak 3, Zamak 5 Aluminium alloys
Capacity ~100 tonnes / month On request On request
Best for Housings, covers, brackets, heat sinks Fittings, locks, hardware, connectors Heavier housings, pump & valve bodies

Typical die cast parts: pump and motor housings, gearbox covers, valve bodies, brackets, heat sinks, electrical enclosures, locks, fittings and automotive components.

Precision Machining

Automatic PLC-based Sand Plant with molding
track line system

CNC, VMC, VTL, and HMC machining centers

ARPA Moulding Machines and No-bake Molding setups

Dust collectors, sand coolers, and 75-ton sand storage

Fully equipped testing laboratory

This world-class infrastructure allows us to maintain precision, repeatability, and reliability across all production batches.

Read More

Our Metal Casting Services

Automated PLC-controlled processes for consistent quality

Ferrous and non-ferrous casting capabilities

Rapid RFQ responses and short tooling lead times (as low as 2 weeks)

No minimum order quantity — perfect for both prototypes & production

Full traceability with test certificates for chemical & mechanical properties

Competitive pricing and global shipping capability

Material We Use

We offer multi-material casting expertise suited to diverse industrial requirements:

Each material is chosen for its mechanical strength, corrosion resistance, and heat performance, tailored for sectors like automotive, energy, oil & gas, and heavy engineering.

CARBON STEEL

STAINLESS STEEL

ALUMINUM

ZINC

COPPER

DUCTILE IRON

17-7 PH

Quality & Certification

Sharma Technocast is ISO 9001:2015 certified (accredited and verifiable on IAF CertSearch). Every casting is traceable to its heat, and test certificates are supplied with each shipment.

Certification ISO 9001:2015 Quality Management System
In-house testing Chemical analysis, hardness testing, dimensional inspection
NDT on request X-ray (radiography) and ultrasonic testing
Documents supplied Material test certificates, dimensional inspection reports, NDT reports where specified
Traceability Every casting traceable to its heat number

Additional Metal Casting Processes

We don’t just deliver castings, we deliver complete manufacturing solutions tailored to your project’s unique requirements. Our value-added processes include heat treatment to enhance material strength and durability, CNC and VMC precision machining to achieve perfect dimensional accuracy and flawless fit, and surface coating and plating for improved longevity, corrosion resistance, and refined aesthetics. Each step is engineered to ensure that your components not only meet performance standards but also exceed expectations in reliability and finish.

Precision meets craftsmanship.

Our machining division performs turning, milling, drilling, threading, and surface finishing with exact tolerances. Using modern CNC and VMC systems, every part achieves dimensional precision and flawless functionality — ready for assembly or direct application.

 

To ensure your parts perform and look their best, we offer:

  1. Shot blasting, vibratory finishing, and polishing
  2. Powder coating, anodizing, and painting for corrosion protection
  3. Custom finishing for industrial or aesthetic applications
 

Quality is at the core of Sharma Technocast.

 Every casting undergoes multi-stage testing using:

  • X-ray and Ultrasonic inspection
  • Dimensional accuracy checks
  • Chemical composition and hardness testing
 

Our in-house assembly division integrates castings, machined components, and subassemblies into ready-to-use engineered solutions. Whether it’s a small component or a complex industrial product, we ensure precision fit, functionality, and reliability — saving clients time and resources.

 
Our Experts Answer

Frequently Asked Questions

Metal casting is a manufacturing process in which molten metal is poured into a mould shaped like the final part and left to solidify. Once cooled, the casting is removed, cleaned and usually machined to final dimensions. It is the most economical way to make complex shapes, from a few grams to several tonnes.
We offer sand casting (flask, flaskless and no-bake), investment (lost-wax) casting, horizontal and vertical centrifugal casting, aluminium pressure die casting, zinc hot-chamber die casting and gravity die casting. Every process is backed by in-house CNC machining, heat treatment, shot blasting, surface finishing and inspection, so you receive finished, ready-to-fit parts from one supplier.

What size and weight of castings can you produce?
Investment castings range from 0.3 kg to 99 kg with walls down to 3 mm. Sand castings go up to 1000 x 1100 x 350 mm and 200 kg using the no-bake process. Horizontal centrifugal castings reach 550 mm outside diameter and 800 kg, and vertical centrifugal castings up to 600 mm outside diameter. Aluminium pressure die castings range from 10 grams to 5 kg, and gravity die castings go up to 15 kg.

Sand casting uses a sand mould and suits medium to large parts at a lower tooling cost, with more machining allowance. Investment casting uses a ceramic shell around a wax pattern and delivers near-net shapes, finer surface finish and tighter tolerances (around ±0.1 mm), making it better for small, complex or precision parts.
When should I choose die casting instead of sand or investment casting? Choose die casting for aluminium or zinc parts needed in medium to high volumes, where thin walls, consistent dimensions and a smooth finish matter. The steel die costs more up front, but the cost per part is much lower over thousands of pieces. For low volumes, large parts or steel and iron alloys, sand or investment casting is usually more economical.
No. We cast from single prototypes and small batches to bulk production runs. Tooling can be ready in as little as two weeks, and we recommend the most economical process for your quantity.
Tooling typically takes 2–4 weeks. First samples and production usually take 4–17 weeks depending on part size, complexity, material, quantity and machining. We confirm a firm schedule with every quotation.
Each shipment can include material test certificates for chemical composition and mechanical properties, dimensional inspection reports, and NDT reports (X-ray or ultrasonic) where your drawing or specification requires them. Every casting is traceable to its heat.
We control defects through casting simulation, correct gating and riser design, metal degassing, controlled pouring temperatures, and visual, dimensional and NDT inspection where specified. Our foundry team reviews each new part for porosity, shrinkage and cold-shut risks before tooling is made.

Send your drawing (PDF, STEP or IGES), material grade, quantity, required standard and target delivery date through our RFQ form or to [email protected]. We usually reply with a quotation within 24–48 hours.

Why Choose Sharma Technocast For Metal Casting?

Sharma Technocast delivers high-quality metal casting solutions backed by advanced technology and real industry experience. Our reliable production strength and continuous innovation make us a strong choice for investors seeking long-term value. With a focus on precision and customer satisfaction, we provide casting components trusted by clients across multiple industries.
View Next Page >>